Top Jobs

We are seeking a qualified Civil or Geotechnical Engineer with proven experience in deep excavation design to review the stability analysis of an excavation approximately 12 meters deep, supported by a secant pile wall and prestressed ground anchors. The analysis has been conducted using Rocscience Phase2 software. The review must assess whether the excavation and support system are safe, following FHWA or other relevant international standards. Deliverables include clear, concise review notes confirming the safety (or identifying any issues) of the system. This task must be completed within 3 days of assignment. Prior experience with similar projects is essential.

We are seeking a qualified Structural Engineer with proven expertise in tower design using STAAD software. The task involves reviewing a gantry tower design by independently from provided model to verify the results provided in the submitted design report. The reviewer is expected to analyze the structural performance, validate the calculations, and provide technical comments or recommendations if discrepancies are found. The complete review, including model verification and feedback, must be submitted within 3 days from the date of assignment.

We are looking for an experienced freelance geotechnical engineer to undertake the geotechnical review and detailed foundation and slope design for key water infrastructure components, including one pump station (Q = 1.4 m³/sec × 5 pumps = 7.0 m³/sec), one drainage gate (B 2.0m × H 2.6m × 3 units), three box culverts (B 3.0m × H 2.5m × 3 units) in the main canal, and two box culverts in the secondary canal. The project site is situated on soft ground with geotechnical investigations indicating soft clay down to 9.0 meters, underlain by sand, with grey Gleysols and orange soft clay dominating the soil profile. Due to these conditions, large diameter piling is not suitable; therefore, the foundation design should consider micro-piling or raft foundations as viable alternatives. We invite qualified professionals with experience in designing foundations on soft and waterlogged soils to express interest and provide design proposals based on the investigation results. The design shall be based on Euro Code or British Code. The work needs to be finish in 7 days after assignment.

We are looking for a qualified Civil or Geotechnical Engineer to review a slope stability analysis of a backfill material placed on a hill surface with a height of approximately 30 meters. The backfill is inclined at a 45-degree angle and supports a road constructed on top. The original analysis was performed using Phase 2 software. The task involves reviewing the provided model and results, and delivering clear, concise review notes confirming whether the backfill is safe or not. The deliverables must be submitted within 3 days of assigning the project. Prior experience with similar geotechnical designs is required.

The data collectors/enumerators are required to collect the data related to the municipal infrastructures (roads) of the municipality located in the Madhesh Province. The project title is Municipal Transport Master Plan. The job is not an individual basis but project basis, so at least 4 data collectors are required to complete the job. The overall package for the job is Nrs. 50000 to Nrs. 70000.

We are looking for a qualified Civil or Structural Engineer with experience in hydropower structures to carry out the structural design of a concrete M25 headpond connected to a desander outlet gate. The design needs to comply with Indian Standard codes or ACI codes and be performed using SAP 2000. The project involves stability checks either manually or via the software (SAP 2000). The headpond is part of a headworks system for an approximately 8 MW hydropower project. The work needs to be completed within 10 days from the project initiation. Deliverables include the SAP 2000 model files, and a manually sketched reinforcement drawing in provided concrete outline drawing suitable for drafting. Applicants with proven experience in similar hydropower-related structural designs will be preferred. Simple guidance might be given for structural modeling, analysis and design but the designer must have prior experience in SAP 2000 and hydropower structural design. The design work will be reviewed by experts for finalization.

We are looking for a qualified Civil or Structural Engineer to review a 500 sqm, 1.5-storey control building design in Nepal following ACI code. The reviewer needs to create their own SAP2000 model to verify the results presented in the report. The review needs to be completed within 4 days of assignment. Engineers with relevant design experience are encouraged to apply.

We are looking for a skilled Civil or Structural Engineer to perform the structural design of headworks, including intake, gravel trap, flushing gate, undersluice, and spillway (all monolithic), for an 8MW hydropower project. The design must follow Indian Standards (IS code) and use SAP 2000 for analysis, with stability checks conducted either through software or manually. The material type specified is Concrete M25, and deliverables include SAP models, manual sketches of rebar and section details for drafting, report summary. The work must be completed within one week from project initiation. Engineers with prior experience in similar designs are preferred. The results once delivered will be reviewed by experts and may need to amend accordingly