Top Jobs

This work involves a detailed review of an already designed powerhouse structural system, focusing on reinforced concrete frame elements (columns and beams) modeled in SAP software. The reviewer will run the existing SAP model and verify whether the provided member sizes and reinforcements—longitudinal, shear, and torsional—match those shown in the issued structural drawings. An Excel comparison format will be provided, and the reviewer is required to input reinforcement data from the SAP output and corresponding drawings for each frame element to enable clear verification. The total number of frame elements is approximately 400, and the deliverable will be a complete set of filled Excel sheets covering all frames. The review duration is 7 days. This assignment requires expertise in Civil Engineering or Structural Engineering with practical experience in SAP-based reinforced concrete design and checking.

Looking for a structural engineer to design a 3-story (6,000 sq. ft.) building as per the Nepal Building Code. Need report + drawings within 6 days.

We are seeking a skilled Civil Engineer or Draftsperson with experience in hydropower structures to assist in preparing AutoCAD drawings based on sketches provided by our structural engineers. The drawings are required at the detailed design level (not for construction purposes). The selected candidate will primarily work from home, with occasional online meetings as needed for coordination and guidance. This freelance engagement is expected to last approximately six months. Strong proficiency in AutoCAD and a solid understanding of hydropower structural components are essential.

We are seeking a qualified Civil or Geotechnical Engineer with proven experience in deep excavation design to review the stability analysis of an excavation approximately 12 meters deep, supported by a secant pile wall and prestressed ground anchors. The analysis has been conducted using Rocscience Phase2 software. The review must assess whether the excavation and support system are safe, following FHWA or other relevant international standards. Deliverables include clear, concise review notes confirming the safety (or identifying any issues) of the system. This task must be completed within 3 days of assignment. Prior experience with similar projects is essential.

We are seeking a qualified Structural Engineer with proven expertise in tower design using STAAD software. The task involves reviewing a gantry tower design by independently from provided model to verify the results provided in the submitted design report. The reviewer is expected to analyze the structural performance, validate the calculations, and provide technical comments or recommendations if discrepancies are found. The complete review, including model verification and feedback, must be submitted within 3 days from the date of assignment.

We are looking for an experienced freelance geotechnical engineer to undertake the geotechnical review and detailed foundation and slope design for key water infrastructure components, including one pump station (Q = 1.4 m³/sec × 5 pumps = 7.0 m³/sec), one drainage gate (B 2.0m × H 2.6m × 3 units), three box culverts (B 3.0m × H 2.5m × 3 units) in the main canal, and two box culverts in the secondary canal. The project site is situated on soft ground with geotechnical investigations indicating soft clay down to 9.0 meters, underlain by sand, with grey Gleysols and orange soft clay dominating the soil profile. Due to these conditions, large diameter piling is not suitable; therefore, the foundation design should consider micro-piling or raft foundations as viable alternatives. We invite qualified professionals with experience in designing foundations on soft and waterlogged soils to express interest and provide design proposals based on the investigation results. The design shall be based on Euro Code or British Code. The work needs to be finish in 7 days after assignment.

We are looking for a qualified Civil or Geotechnical Engineer to review a slope stability analysis of a backfill material placed on a hill surface with a height of approximately 30 meters. The backfill is inclined at a 45-degree angle and supports a road constructed on top. The original analysis was performed using Phase 2 software. The task involves reviewing the provided model and results, and delivering clear, concise review notes confirming whether the backfill is safe or not. The deliverables must be submitted within 3 days of assigning the project. Prior experience with similar geotechnical designs is required.

The data collectors/enumerators are required to collect the data related to the municipal infrastructures (roads) of the municipality located in the Madhesh Province. The project title is Municipal Transport Master Plan. The job is not an individual basis but project basis, so at least 4 data collectors are required to complete the job. The overall package for the job is Nrs. 50000 to Nrs. 70000.